The mixer has four advantages: safety, comfort, energy saving and low residual rate.

方面：采用大运、福田、重汽、陕汽原装底盘，标配全钢高强度驾驶室，整车经正面碰撞、侧面碰撞、顶压及防钻验证，保障驾驶员，罐体倾角采用10°低倾角设计，整车更低，提高车辆行驶平稳性；

Safety: the original chassis of Dayun, Foton, sinotruk and Shaanxi Automobile is adopted, and all steel high-strength cab is equipped as standard. The vehicle has been verified by frontal collision, side collision, top pressure and anti drilling to ensure the driver's safety. The tank inclination angle adopts 10 ° low inclination angle design, with lower vehicle center of gravity and higher vehicle running stability;

舒适方面：每一辆车都经过严格的喷淋检验，密闭性好，限度的防风、防尘、防噪音，驾乘舒适；

Comfort: each car has passed strict spray test, good airtightness, maximum wind, dust, noise proof, comfortable driving and riding;

方面：在搅拌车等待卸料工况下，发动机怠速转速仅为700r/min，在搅拌车等待卸料工况下，油耗更低；

Energy saving: when the mixer is waiting for unloading, the idle speed of the engine is only 700R / min, and the fuel consumption is lower when the mixer is waiting for unloading;

低残余率方面：搅拌叶片采用精制对数螺旋线加内凹的双曲面形状设计，罐体残余率＜0.6%，远低于2%残余率标准。

Low residual rate: the mixing blade is designed with refined logarithmic spiral and concave hyperboloid shape, and the tank residual rate is less than 0.6%, which is far lower than the national 2% residual rate standard.

专用功能说明：

Special function description:

1、液压驱动系统：采用德国、意大利原装进口企业，系统布局简洁、运输可靠；

1. Hydraulic drive system: imported brand from Germany and Italy, simple system layout and reliable transportation;

2、供水系统：采用压力供水的方式，简化结构、节省动力、减轻整车重量；

2. Water supply system: pressure water supply is adopted to simplify structure, save power and reduce vehicle weight;

3、搅拌筒：采用犁形结构，双螺旋曲面叶片，在不同的锥段采用不同的叶片，提高了水泥土的质量；筒体安装倾斜角度小，降低了整车高度，行驶稳定性好，而且较小的倾斜角更加有利于干硬性水泥土的排出，减少剩余率。

3. Mixing drum: plough shaped structure, double helix curved blade and different blades are used in different cone sections to improve the quality of cement soil; the installation inclination angle of cylinder body is small, which reduces the height of vehicle center of gravity, and has good driving stability, and the smaller inclination angle is more conducive to the discharge of dry and hard cement soil and reduces the residual rate.

4、操作装置：分为软轴操纵器和连杆式操纵器，连杆式操纵器可实现多点操纵。

4. Operating device: it is divided into flexible shaft manipulator and connecting rod manipulator, which can realize multi-point operation.

5、进出料装置：由进料斗、排料槽可在水平方向旋转180度，以适应不同的卸料位置。

5. Feeding and discharging device: the feeding hopper and discharge chute can rotate 180 degrees in horizontal direction to adapt to different discharging positions.

6、罐体喷漆：罐体表面喷涂两层聚胺脂面漆，采用烤漆工艺，涂层均匀，粘附牢固，光泽更持久。

6. Tank painting: two layers of polyurethane topcoat are sprayed on the surface of the tank body, and the baking process is adopted. The coating is uniform, the adhesion is firm, and the luster is more lasting.