Because of environmental protection problems, many places are not allowed to build too many concrete mixing plants, and advocate the purchase of commercial concrete. Through the centralized mixing of concrete to control the environmental pollution. For commercial concrete mixing plant, as mixing host, it needs to have full-automatic performance to meet the demand for production capacity and production speed.

全自动混凝土搅拌机再搅拌站施工开始时，就已经经过工程师仔细调试了，所以对于操作者来说日常操作还是比较简单的。

At the beginning of the construction of the automatic concrete mixer mixing station, it has been carefully adjusted by the engineer, so the daily operation is relatively simple for the operator.

打开混凝土搅拌机的控制面板，我们可以看到很多按钮，这里就是混凝土搅拌机的控制系统。作为操作员需要清楚的了解各个按钮的作用，并能做基础的维修工作。

Open the control panel of concrete mixer, we can see many buttons, here is the control system of concrete mixer. As an operator, you need to clearly understand the function of each button, and be able to do basic maintenance work.

下面就来讲一下全自动混凝土搅拌机的具体操作步骤

Now let's talk about the specific operation steps of automatic concrete mixer

1、正确的开机顺序，将支柱上的功能开关切换到自动挡，然后再按下启动开关，这样整个过程就可以自动运行了。

1. Correct start-up sequence, switch the function switch on the pillar to the automatic gear, and then press the start switch, so that the whole process can run automatically.

2、如果中途需要停止，要先按下停止，并等机器完全停止，需要运行时，重新启动就行了。

2. If you need to stop halfway, you should first press stop, and wait for the machine to stop completely. When you need to run, restart it.

3、混凝土搅拌机的显示屏幕上会显示时间，快慢速，停止等按钮，相关的指示灯也会开始闪烁。

3. The time, speed, stop and other buttons will be displayed on the display screen of the concrete mixer, and the relevant indicator lights will start to flash.

4、搅拌工作完成后，将模式调回到手动模式，然后切断电源开关。

4. After the mixing work is completed, the mode is adjusted back to the manual mode, and then the power switch is cut off.

客户在操作上须严格遵循这个操作步骤，保证混凝土搅拌机的平稳运行，既简单又方便，

Customers must strictly follow this operation procedure to ensure the smooth operation of concrete mixer, which is simple and convenient,

在混凝土搅拌站中，控制系统的电缆是与控制室连接的。除了JS混凝土搅拌机，其他配套设备也是在控制系统下完成的。维修人员在工作结束后还需要注意加注润滑油、记录设备磨损情况和完成清洗工作。

In the concrete mixing plant, the cable of the control system is connected with the control room. In addition to JS concrete mixer, other supporting equipment is also completed under the control system. Maintenance personnel also need to pay attention to filling lubricating oil, recording equipment wear and finish cleaning after work.