在设备实际操作运行过程中，自动混凝土搅拌机的变速器是一个非常重要的部件。因此，我们在使用过程中对其油质需要有一定的检测工作，那么我们具体应该怎么进行操作呢？

During the actual operation of the equipment, the transmission of the automatic concrete mixer is a very important component. Therefore, we need to have some inspection work on the oil quality during the use, so how should we operate?

1、将自动混凝土搅拌机停放在水平地面上，并拉紧手制动。

1. Park the automatic concrete mixer on the level ground and tighten the hand brake.

2、让发动机怠速运转数分钟。

2. Allow the engine to idle for a few minutes.

3、踩住制动踏板，将操纵手柄拨倒挡、前进挡等位置，并在每个挡位上停留几秒钟，使液力变矩器和所有换挡执行元件中都充满液压油。后将操纵手柄拨停车挡位置。

3. Step on the brake pedal, move the joystick to reverse gear, forward gear, etc., and stay in each gear for a few seconds to make the hydraulic torque converter and all shift actuating elements full of hydraulic oil. Then, turn the joystick to the parking position.

4、从加油管内拨出自动变速器油尺，将擦干净的油尺全部插入加油管再拔出，检查油尺上的油面高度。

4. Pull out the automatic transmission oil dipstick from the oil filler pipe, insert the cleaned oil dipstick into the oil filler pipe and then pull it out, and check the oil level on the oil dipstick.

在对自动混凝土搅拌机变速器进行检查或故障诊断前，先要对变速器油面和油质进行检查。把选挡手柄放在P位，将发动机在怠速时少运转数分钟，油液达到正常工作温度，汽车须停放在水平路面上，这样才能确保在差速器和变速器之间的油面高度正常、稳定。

Before checking or diagnosing the transmission of the automatic concrete mixer, check the oil level and quality of the transmission. Put the gear selection handle at P position, and run the engine at idle speed for at least a few minutes. The oil reaches normal operating temperature. The car must be parked on a level road, so as to ensure that the oil level between the differential and the transmission is normal and stable.

自动混凝土搅拌机变速器油质的检测方式就讲解到这里了，可供您参考使用，要结合您的实际情况来使用方法，更多相关内容的了解就来我们网站http://www.zkhntjbc.com看看吧！

The inspection method of the transmission oil quality of the automatic concrete mixer is explained here for your reference. You should use the method according to your actual situation. For more information, please come to our website http://www.zkhntjbc.com Look!