不同的搅拌机可能有不同的配置,相同的点是随着使用时间的增长,就会变得负荷大,工作时间增加可能会出现一些故障,需要检查和保持这一点。那么混凝土搅拌机检修的方法有哪些?
Different mixers may have different configurations. The same point is that with the increase of service time, the load will become heavy. With the increase of working time, some failures may occur, which needs to be checked and maintained. What are the maintenance methods of concrete mixer?
混凝土搅拌机之所以能快速运转,是因为使用了大量的轴承。为了使轴承快速转动,应定期添加润滑油。此外,适当的润滑油不仅可以正常运行,而且可以避免长时间的摩擦对零件造成不同程度的磨损,影响混凝土搅拌机设备的正常运行。
The reason why the concrete mixer can run quickly is that a large number of bearings are used. In order to make the bearing rotate rapidly, add lubricating oil regularly. In addition, proper lubricating oil can not only operate normally, but also avoid abrasion of parts to varying degrees caused by long-term friction, which affects the normal operation of concrete mixer equipment.
混凝土搅拌机虽然自动化生产能力高,在整个生产过程中不需要太多的人工辅助,但操作人员要时刻关注设备的生产状态,比如电机是否正常转动,是否过热,有没有异响。
Although the automatic production capacity of the concrete mixer is high, it does not need too much manual assistance in the entire production process, but the operator should always pay attention to the production status of the equipment, such as whether the motor rotates normally, whether it is overheated, and whether there is abnormal noise.
混凝土搅拌机因工作原因容易受到粉尘污染,但当污染达到一定程度时,会影响混凝土搅拌机设备的正常运行,因此用户应定期清洗。
The concrete mixer is vulnerable to dust pollution due to work, but when the pollution reaches a certain level, it will affect the normal operation of the concrete mixer, so the user should clean it regularly.
混凝土搅拌机每次使用时先要进行一次空转,观察设备是否能正常运转。设备运行过程中,检查电机、减速机、螺杆、转轴发出的声音是否异常,设备温度是否过高;需要检测混凝土搅拌机线、电路、控制箱各部件的润滑油添加量,按要求添加润滑油;
Each time the concrete mixer is used, it shall be idling once to observe whether the equipment can operate normally. During the operation of the equipment, check whether the sound from the motor, reducer, screw and shaft is abnormal, and whether the equipment temperature is too high; It is necessary to detect the amount of lubricating oil added to each component of the concrete mixer line, circuit and control box, and add lubricating oil as required;
Keep the concrete mixer clean in time, and keep abreast of pollutants and obstacles on the body. More relevant device content will come to our website http://www.zkhntjbc.com Consult and understand!