When we walk on the main road, more or less, we will encounter a concrete mixer. We can see that since the road is constantly turning and mixing cement, some people will ask why mixing is necessary even if it is not working? Doesn't that increase the risk of damage to the car? The following small make up for everyone to talk about the concrete mixer why such a state.

作为一种运送或者搅拌建筑用混凝土的专用卡车，混凝土搅拌车无疑给建筑工人们省了许多事。只需要将水泥、水、砂石等建筑材料放到搅拌罐中，在搅拌装置的作用下，搅拌罐正转，混凝土沿罐子内部的螺旋叶片向里运动将材料混合均匀，然后再反转搅拌罐，混凝土便沿着叶片向外卸出。

As a special truck for transporting or mixing construction concrete, concrete mixer truck undoubtedly saves construction workers a lot of things. Just put the cement, water, sand and stone and other building materials into the mixing tank. Under the action of the mixing device, the mixing tank rotates forward, and the concrete moves inward along the spiral blades inside the tank to mix the materials evenly. Then, the mixing tank is reversed, and the concrete is discharged outward along the blades.

然而干过工程的人都知道，混凝土一旦长时间静止，就很容易固化成块，当周围有东西时，会牢牢地黏在上面，一旦干了之后，很难去除，因此即使是运送已经搅拌好的混凝土，搅拌车也会不停地转动，以防止混凝土粘在搅拌罐内占用空间，减少搅拌罐的容积。而在使用搅拌车运送混凝土的时候，搅拌罐也会采用回转密封技术，将搅拌车的进出料口牢牢密封住，减少水份蒸发，从而进一步水泥固化的问题。

However, people who have done engineering know that once the concrete is still for a long time, it is easy to solidify into a block. When there is something around it, it will be firmly adhered to it. Once it is dry, it is difficult to remove it. Therefore, even if the concrete has been mixed, the mixer truck will rotate constantly to prevent the concrete from sticking to the mixing tank, occupying space and reducing the volume of the mixing tank. When the mixer truck is used to transport concrete, the rotary sealing technology is also used in the mixing tank to seal the inlet and outlet of the mixer truck firmly to reduce water evaporation, so as to further solve the problem of cement solidification.

同时，为了延长搅拌车的寿命，在每次装料前，都需要用水冲洗进料口，使进料口在装料时保持湿润。到工地卸料后，人们还需要对出料槽以及搅拌罐记性清洗，一般的方法是往内加清洗用水，然后在车辆回程时，保持混凝土搅拌罐慢速转动。当然有时也会在运输途中进行干料搅拌以清洗系统。

At the same time, in order to prolong the service life of the mixer, it is necessary to flush the inlet with water before each loading, so as to keep the inlet wet during loading. After unloading at the construction site, people also need to remember to clean the discharge tank and mixing tank. The general method is to add water for cleaning, and then keep the concrete mixing tank rotate slowly when the vehicle returns. Of course, sometimes dry mixing is used to clean the system during transportation.

以上就是小编为大家介绍的关于混凝搅拌机车一直转动的因素，希望能解答大家的疑惑，如需更多的关于混凝搅拌车的相关知识，请关注我们公司网站：http://www.zkhntjbc.com后续将呈现更多的精彩内容

The above is about the factors that the coagulation mixer has been running for you. I hope you can answer your doubts. If you need more relevant knowledge about coagulation mixer, please pay attention to our company website: http://www.zkhntjbc.com More wonderful content will be presented later