For engineering vehicles such as mixer, chassis can ensure the safety of vehicles and owners. Many people who know how to use a car in the second-hand car market choose a second-hand car by judging the quality of the chassis of the car. Generally, new cars will be sprayed with anti rust primer when they leave the factory, but it will be oxidized slowly after a period of time. Once the chassis parts are rusted and corroded, the structure of the whole vehicle will be loose, which will bring about potential safety hazards. Many traffic accidents are caused by the chassis looseness.

很多人在使用小型混凝土搅拌机的过程中都忽视了对底盘的检修和保养的工作,其实根据众多的挖机运输车使用者的反应,由于没有及时的对地盘进行检查而导致后期的故障总是很多,那么对于车辆底盘该如何进行正确的保养呢？以下的内容就是为大家详细的介绍.

In the process of using small concrete mixer, many people ignore the repair and maintenance of chassis. In fact, according to the reaction of many excavator transport vehicle users, there are always many faults in the later stage due to the lack of timely site inspection, so how to maintain the chassis correctly? The following is a detailed introduction for you

有很多车外表看起来光艳照人,而底盘早已经锈蚀斑斑,漏洞百出.这主要有以下几个原因：夏日地表的烘烤,平日雨水的侵袭以及大气中的潮气、盐分等都会侵蚀车底,导致车辆提前老化.路上各种砂石不断撞击汽车底盘与轮毂等部位,使出厂时底盘上所固有的防锈漆和镀锌层很快就会被破坏,从而让金属裸露在外,与水分接触后导致氧化生锈.那底盘装甲的施工过程又是怎么样的呢？下面就为各位车主细说一二.由施工人员用升降机将车辆举升1.3米左右,卸下四轮、挡泥板、刹车片.然后继续再将车辆举一个人高度,对车辆底部进行彻底的清洗.随后将其吹干,对非喷涂部件进行包裹,反复喷涂,待其干后,装上轮胎并做完四轮定位才算真正完成底盘装甲全过程.

There are a lot of cars that look bright on the outside, but the chassis has been corroded and full of holes. This is mainly due to the following reasons: the baking of the surface in summer, the invasion of rain on weekdays, and the moisture and salt in the atmosphere will erode the bottom of the car, leading to the premature aging of the car, The anti rust paint and zinc coating inherent in the chassis will be damaged soon, so that the metal will be exposed, which will lead to oxidation and rust after contacting with water. What about the construction process of chassis armor? Next, let's talk about it in detail for the owners. The construction personnel lift the vehicle to about 1.3 meters with a lift, remove the four wheels, mudguards and brake pads, and then continue to lift the vehicle to a person's height to thoroughly clean the bottom of the vehicle. Then blow it dry, package the non spray parts, and finally spray it repeatedly until it is dry, Install the tire and finish the four wheel alignment to complete the whole process of chassis armor

由于底盘装甲是对要求非常高的施工项目,不仅需要有资质的施工技师,而且的施工工具对完成施工及其施工质量更是不可或缺,施工过程任何一个环节出错都会直接影响到效果,其后果将直接危及行车及车主的生命.因此选择有一定规模、有能力且经产品指定商许可的能提供规范服务的汽车服务店关重要.因,轮胎气压过低的情况下,加重轮胎的老化,且增加轮胎与地面的接触面积,很大程度上会降低轮胎寿命.希望通过以上的内容介绍和分析,后期广大的挖机运输车用户在使用的过程中应定期的对车辆进行检查和检测.

Because chassis armor is a construction project with very high professional requirements, not only professional qualified construction technicians are needed, but also professional construction tools are indispensable for the completion of construction and construction quality. Mistakes in any link of the construction process will directly affect the effect, The consequences will directly endanger the driving safety and the life safety of car owners. Therefore, it is very important to select a car service shop with a certain scale, ability and permission from the product specifier that can provide standard service, It will reduce tire life to a great extent. I hope that through the above content introduction and analysis, the majority of excavator transport vehicle users should regularly check and test the vehicle in the process of use