When using automatic concrete mixer, the failure of anti lock system will affect the normal operation of automatic concrete mixer. However, if the anti lock braking system of the automatic concrete feeding mixer fails, it should be solved in time. Otherwise, the construction efficiency will be affected. How to make anti lock braking system of automatic concrete feeding mixer?

1.确保混凝土自动搅拌机上的驻车制动器已完全释放。

1. Make sure that the parking brake on the automatic concrete mixer is fully released.

2.确保混凝土自动装带器制动储罐的液位符合本手册的要求。

2. Ensure that the liquid level of the brake tank of the automatic concrete loader meets the requirements of this manual.

3.检查混凝土自动加载式搅拌机上的所有制动管是否有损坏或泄漏的迹象。

3. Check all brake pipes on automatic loading concrete mixer for signs of damage or leakage.

4.确保防抱死制动系统中的所有保险丝均未损坏，电线也未损坏，并且插座牢固。

4. Make sure that all fuses in ABS are not damaged, wires are not damaged and sockets are firm.

5.确保电池容量和电压符合要求，并且正极线和负极线之间的连接可靠。

5. Ensure that the battery capacity and voltage meet the requirements, and the connection between the positive wire and the negative wire is reliable.

6.确保防抱死制动系统和ECI_I连接器牢固连接。

6. Ensure ABS and ECI_ The I connector is firmly connected.

7.检查电路连接是否腐蚀，损坏，松动和接触不良。每个ABS接地线的接地是否可靠？

7. Check the circuit connection for corrosion, damage, looseness and poor contact. Is the grounding of each ABS grounding wire reliable?

8.检查轮胎是否符合要求。

8. Check whether the tire meets the requirements.

9.检查混凝土自动饲料搅拌机的车轮是否旋转，轮毂轴承间隙是否正常。

9. Check whether the wheels of the concrete automatic feed mixer rotate and whether the hub bearing clearance is normal.

自动混凝土搅拌车锁紧系统的检验十分关键，你记住住了吗？更多详情请关注：http://www.zkhntjbc.com

The inspection of locking system of automatic concrete mixer is very important. Do you remember? For more details, please pay attention to: http://www.zkhntjbc.com