欢迎您访问莱州聚峰机械有限公司网站!
搅拌机行业持续先行者!
点击拨打服务热线:400-879-1999
您的位置: 首页 > 新闻资讯小型混凝土搅拌机怎么用零件不磨损

新闻资讯

产品

新闻

  • 小型搅拌机的正确操控有哪些要求
  • 搅拌机使用时4大“控制”达到目的
  • 混凝土搅拌机检修的方法有哪些
  • 小型搅拌机零件气门的顺利使用方式
  • 混凝土搅拌机的操作保养关注事项
  • 什么原因导致搅拌机存在抱轴问题

全国服务热线

400-879-1999
新闻资讯 /

小型混凝土搅拌机怎么用零件不磨损

来源:http://www.zkhntjbc.com/ 日期:2021-09-13
概述:小型混凝土搅拌机使用过程中,零件磨损是经常出现的问题,机械设备使用过程中,由于零件的磨损和腐蚀、润滑油的减少或变质、紧固件松动或位移等现象,引起机械的动力性、经济性和
小型混凝土搅拌机使用过程中,零件磨损是经常出现的问题,机械设备使用过程中,由于零件的磨损和腐蚀、润滑油的减少或变质、紧固件松动或位移等现象,引起机械的动力性、经济性和可靠性的降低。中科聚峰建议大家采取下面措施减少磨损,保证稳定生产。
During the use of small concrete mixer, part wear is a common problem. During the use of mechanical equipment, due to the wear and corrosion of parts, the reduction or deterioration of lubricating oil, the loosening or displacement of fasteners and other phenomena, the power, economy, safety and reliability of the machinery are reduced. Zhongke Jufeng suggests the following measures to reduce wear and ensure stable production.
清洁
clean
清洁就是要求商品混凝土搅拌站各部位保持无油泥、无污垢、无尘土,特别是电机、减速箱表面的清洁度,保证机械的正常散热。
Cleaning means that all parts of the commercial concrete mixing plant shall be kept free of oil sludge, dirt and dust, especially the surface cleanliness of the motor and reducer, so as to ensure the normal heat dissipation of the machinery.
小型混凝土搅拌机
紧固
Fastening
紧固就是要对商品混凝土搅拌站各部的连接件及时检查紧固。机械运转中产生的震动容易使连接件松动,如不及时紧固,不仅可能产生漏油、漏气、漏水、漏电等,而且有些关键部位的螺栓松动,还会改变原设计部件的受力分布情况,轻则导致部件变形,重则会出现零件断裂,分离,导致操纵失灵而造成机械事故。
Fastening is to check and fasten the connectors of all parts of the commercial concrete mixing plant in time. The vibration generated during mechanical operation is easy to loosen the connector. If it is not tightened in time, it may not only cause oil leakage, air leakage, water leakage, electric leakage, etc., but also loosen the bolts at some key parts, which will also change the stress distribution of the original design components. At least, it will lead to component deformation, at worst, it will lead to component fracture and separation, resulting in operation failure and mechanical accidents.
调整
adjustment
调整就是对商品混凝土搅拌站机械众多零件的相对关系和工作参数等及时进行检查调整,以保证机械的正常运转。尤其是关键部件的灵活可靠性,要调整适当,防止事故发生。
Adjustment is to timely check and adjust the relative relationship and working parameters of many mechanical parts of commercial concrete mixing plant, so as to ensure the normal operation of the machinery. In particular, the flexibility and reliability of key components shall be adjusted appropriately to prevent accidents.
润滑
lubrication
润滑是按照规定的要求,定期加注或更换润滑油,以保持机械运动零部件间的良好润滑,减少零件磨损,保证机械的正常运转。
Lubrication is to fill or replace lubricating oil regularly according to the specified requirements, so as to maintain good lubrication between mechanical moving parts, reduce part wear and ensure the normal operation of machinery.
防护
protect
防护就是要做到对商品混凝土搅拌站的防潮,防锈,防酸,防止腐蚀机械零部件和电气设备。尤其是机械外表必须进行补漆或者涂上油脂等防腐材料。技术知识交流欢迎联系中科聚峰。
Protection is to protect the commercial concrete mixing plant from moisture, rust and acid, and prevent corrosion of mechanical parts and electrical equipment. In particular, the mechanical surface must be painted or coated with anti-corrosion materials such as grease. Welcome to contact Zhongke Jufeng for technical knowledge exchange.

截屏,微信识别二维码