小型搅拌机车这种设备具有很多优点，能够大大提高生产作业的效率。但是，随着油价的上涨，怎样能节省油耗成为了人们关心的问题，而搅拌车作为建筑工程类车辆，节省油耗显得更为重要，怎么做才能降低搅拌机的油耗呢？下面为大家提供一些小窍门，一起来了解一下吧！

Small mixing locomotive has many advantages, which can greatly improve the efficiency of production. However, with the rise of oil price, how to save fuel consumption has become a matter of concern. As a construction engineering vehicle, saving fuel consumption is more important. How to reduce the fuel consumption of mixer? Here are some tips for you to learn about!

1.搅拌机火花塞使用的时间太长，也会出现油耗加大的现象。因为火花塞损坏会使焚烧的能量下降，使搅拌车提速减慢，导致柴油耗损明显增加，只要更换火花塞就好了。

1. If the mixer spark plug is used for too long, the fuel consumption will increase. Because the damage of the spark plug will reduce the energy of incineration, slow down the speed-up of the mixer, and significantly increase the diesel consumption. It's only necessary to replace the spark plug.

2.在行驶中发现搅拌车现在的滑行距离明显减少，这时司机们应该检查一下搅拌车的轮胎气压是否合乎气压标准。若轮胎充气不足，耗油量也会增加。因此需要适时为轮胎充足气。

2. It is found that the current sliding distance of the mixer truck is significantly reduced during driving. At this time, the drivers should check whether the tire pressure of the mixer truck meets the air pressure standard. If the tire is under inflated, the fuel consumption will also increase. Therefore, it is necessary to fully inflate the tires in time.

3.在小型搅拌机行驶中或启动时发现车轮有异常响声，网友们应该及时检查轴承及刹车系统是否有故障。如果车轮转动不正常，就会影响搅拌车的车速，使油耗加大。检修轴承及刹车系统，减少油耗。

3. If the wheels make abnormal noise when driving or starting the small mixer, netizens should timely check whether the bearing and braking system are faulty. If the wheels rotate abnormally, it will affect the speed of the mixer and increase the fuel consumption. Overhaul the bearing and brake system to reduce fuel consumption.

4.当小型搅拌机的温控开关和节温器损坏时，会呈现油耗增加的现象。因为温控开关和节温器损坏会使水温低落，化油器不能正常工作，导致混凝土搅拌车雾化不好，油耗量明显增加。长时间行驶时，凡是会出现汽缸压力不符的现象，这时油耗也会明显增加。同时如果出现这种情况，那么就需要大修了。

4. When the temperature control switch and thermostat of the small mixer are damaged, the fuel consumption will increase. Because the temperature control switch and thermostat are damaged, the water temperature will be low, and the carburetor can not work normally, resulting in poor atomization of the concrete mixer and obvious increase in fuel consumption. When driving for a long time, the cylinder pressure is inconsistent, and the fuel consumption will increase significantly. At the same time, if this happens, it will need to be overhauled.