大家对于自动混凝土搅拌机肯定不会陌生,那么
自动混凝土搅拌机清洗的方法以及如何养护您了解多少呢?下面跟着小编一起看下吧!
We are certainly familiar with automatic concrete mixers. How much do you know about the cleaning methods and curing methods of automatic concrete mixers? Let's follow Xiao Bian to have a look!
自动混凝土搅拌机的清洗方法:
Cleaning method of automatic concrete mixer:
1.每次灌装前用水冲洗进料口,以便在灌装过程中保持进料口湿润;
1. Before each filling, flush the feed inlet with water to keep it wet during the filling process;
2.在装载的同时,将装有车辆的洗涤水箱装满水;
2. When loading, fill the washing water tank containing the vehicle with water;
3.充电后冲洗进料口,清洗进料口附近残留的混凝土;
3. After charging, flush the feed inlet and clean the residual concrete near the feed inlet;
4.在施工现场卸载后,冲洗排放槽,然后在全自动混凝土搅拌槽中加入30-40L清洗水;在车辆返回时保持混凝土储罐缓慢旋转;
4. After unloading at the construction site, flush the discharge tank, and then add 30-40L of cleaning water into the automatic concrete mixing tank; Keep the concrete tank rotating slowly when the vehicle returns;
5.在下次装货前,记得放下自动混凝土搅拌槽中的污水;
5. Before the next loading, remember to put down the sewage in the automatic concrete mixing tank;
6.每天清洁自动混凝土搅拌槽和工作周围的进出口,确保没有水泥和混凝土结块。
6. Clean the automatic concrete mixing tank and the inlet and outlet around the work every day to ensure that there is no cement and concrete caking.
自动混凝土搅拌机养护要求:
Maintenance requirements of automatic concrete mixer:
1.混合器将定期清洁燃油系统,并控制积碳的产生,以使发动机保持状态。
1. The mixer will regularly clean the fuel system and control the carbon deposition to keep the engine in good condition.
2.搅拌车使用适当质量等级的油。对于发动机,应根据进气和排气系统的附加设备和运行条件选择SD-SF级发动机机油;柴油机应根据机械负荷使用CB-CD级柴油机油。选择规格基于不少于制造商的规定。
2. The mixer truck shall use oil of appropriate quality grade. For the engine, SD-SF engine oil shall be selected according to the additional equipment and operating conditions of the intake and exhaust system; The diesel engine shall use CB-CD diesel engine oil according to the mechanical load. The selection of specifications is based on not less than the manufacturer's specifications.
3.搅拌机将定期更换机油和滤芯。在任何质量等级的操作过程中,油质都会发生变化。为防止问题的发生,应根据使用条件定期更换机油,并且机油量应适中(通常是油垢的上限)。
3. The oil and filter element of the mixer will be replaced regularly. During operation at any quality level, the oil quality will change. In order to prevent problems, the engine oil should be changed regularly according to the service conditions, and the amount of engine oil should be moderate (usually the upper limit of oil stain).
4.搅拌机坚持曲轴箱的良好通风。
4. The agitator shall keep the crankcase well ventilated.
This is all about the cleaning and maintenance requirements of the mixer. If you have any information about this, please come to our website http://www.zkhntjbc.com Ask and understand!