In the previous article, we talked about how to install each part of the concrete mixer, but the batching machine is more special and important, so we will highlight it for you.

如果混凝土搅拌机使用的是皮带输送机的话，先安装皮带输送机，安装时将托辊组及改向滚筒装在机架中，在安装皮带，如果没有皮带输送机，则采用骨料提升装置，在安装搅拌主机的时候，需要对卷扬机，爬梯轨道等进行安装，比较简单。

If the concrete mixer uses a belt conveyor, the belt conveyor should be installed first. When installing the belt, the idler group and the steering roller should be installed in the frame. When installing the belt, if there is no belt conveyor, the aggregate lifting device should be used. When installing the mixing host, the winch and ladder track should be installed, which is relatively simple.

配料机的安装在地面上进行，有时候配料机被架高，有时候配料机被隐藏在地表，都有其好处。将称斗用予挂螺杆吊在料仓下部，待骨料仓安装定位后，调整称斗吊点处螺丝，使称斗处于水平状态，然后换上传感器悬挂装置。在安装混凝土搅拌站时必须要按照以上组装顺序进行，并且要安装一段，测量检测一段，在前一段测量、检查、调整合格前，不得进行下一段的安装。

The installation of batching machine on the ground, sometimes the batching machine is elevated, and sometimes the batching machine is hidden on the ground, all have its advantages. Hang the weighing bucket at the lower part of the silo with the pre hanging screw. After the aggregate bin is installed and positioned, adjust the screws at the lifting point of the weighing bucket to make the weighing bucket in a horizontal state, and then replace the sensor suspension device. The installation of concrete mixing plant must be carried out according to the above assembly sequence, and one section shall be installed, and one section shall be measured and tested. The installation of the next section shall not be carried out before the measurement, inspection and adjustment of the previous section are qualified.

假如混凝土搅拌机是短期运用，不想固定地脚螺栓的状况下，在机座上铺设木枕并且平放稳定来更好的固定配料机。操作台应以让我们的操作员能看到各部位的工作状况为宜，在操作台上还应当铺上橡胶或者枯燥木板。

If the concrete mixer is short-term use, do not want to fix the anchor bolt, lay wooden sleeper on the machine base and lay it horizontally and stably to better fix the batching machine. The operating platform should be so that our operators can see the working conditions of various parts, and rubber or dry wood board should also be paved on the operating table.

混凝土搅拌机各部位的安装均需要经验人士来进行，之后还要进行调试，所以大家在购买混凝土搅拌机一定要问清楚厂家是否负责安装，不然会给后期使用带来麻烦！

The installation of all parts of the concrete mixer needs experienced personnel to carry out, and then debugging, so we must ask whether the manufacturer is responsible for the installation of the concrete mixer, otherwise it will bring trouble to the later use!