欢迎您访问莱州聚峰机械有限公司网站!
搅拌机行业持续先行者!
点击拨打服务热线:400-879-1999
您的位置: 首页 > 新闻资讯小型搅拌机雨后检查工作怎么做?

新闻资讯

产品

新闻

  • 小型搅拌机的正确操控有哪些要求
  • 搅拌机使用时4大“控制”达到目的
  • 混凝土搅拌机检修的方法有哪些
  • 小型搅拌机零件气门的顺利使用方式
  • 混凝土搅拌机的操作保养关注事项
  • 什么原因导致搅拌机存在抱轴问题

全国服务热线

400-879-1999
新闻资讯 /

小型搅拌机雨后检查工作怎么做?

来源:http://www.zkhntjbc.com/ 日期:2022-04-04
概述:  酸雨经常含有杂质,在车辆被雨淋后,很长时间不清洁,酸会腐蚀一层明亮漆膜的外观,油漆会变得暗淡无光。所以在雨后洗车比以往任何时候
  酸雨经常含有杂质,在车辆被雨淋后,很长时间不清洁,酸会腐蚀一层明亮漆膜的外观,油漆会变得暗淡无光。所以在雨后洗车比以往任何时候都更重要。所以说小型搅拌机在雨后行驶前一定要做好检查工作。
  Acid rain often contains impurities. After the vehicle is doused in the rain and not cleaned for a long time, the acid will erode the appearance of a bright paint film and the paint will become dull and dull. So it's more important than ever to wash your car after a rain. So small blender in the rain before driving must do a good job of inspection.
  小型搅拌机零部件如果脏了,过滤效果就会恶化,在油缸中过度杂质,增加零件磨损,会增加失败的可能性;如果被严重堵塞,就会导致车辆不能正常工作。
  If the small mixer parts are dirty, the filtering effect will deteriorate. Excessive impurities in the cylinder will increase the wear of parts and increase the possibility of failure. If it is heavily blocked, it will cause the vehicle to not work properly.
  小型搅拌机底盘的维护也是很重要的,在雨中驾驶自动上料搅拌车,润滑油等容易洗掉雨水,导致底盘易受腐蚀,所以注意小型搅拌机底盘的清洁和防锈处理是很重要的。
  The maintenance of small mixer chassis is also very important. Driving automatic feeding mixer in the rain, lubricating oil and other easy to wash away the rain, resulting in the chassis is vulnerable to corrosion, so it is very important to pay attention to the cleaning and rust prevention treatment of small mixer chassis.
  如果是一辆新的小型搅拌机,在雨季就可以少花力气。因为通常这些新车在出厂前就已经被用来锈了。一些年龄较大、发生重大事故的自动上料搅拌车需要特别注意底盘的维护。
  If it's a new small blender, it will take less effort during the rainy season. Because usually these new cars are used to remove rust before they leave the factory. Some older, major accidents occurred in the automatic feeding mixer truck need special attention to the maintenance of the chassis.
  在实际应用过程中,工作人员需要按照正确要求进行应用,要保证每隔一段时间进行彻底的检修,就算没有出现故障隐患也要进行检修,这样做的目的是为了发现一些小的隐患故障,这样才能避免出现大的故障,自然就会让维修成本得到合理控制。
  In the process of practical application, the staff need to be done in accordance with the requirements for correct application, to ensure that every once in a while for a thorough overhaul, did not appear the problems also must carry on the inspection, the aim is to discover the hidden trouble of the small fault, so as to avoid big fault, nature will make the maintenance cost get reasonable control.
  实际应用过程中能够避免出现各种意外问题,保证使用过程更为,自然就会带来更好的使用效果。当然了,如果机器出现故障,也不用慌,冷静分析故障原因,采用对应的方法。更多内容就来www.zkhntjbc.com网站咨询吧!
  The practical application process can avoid all kinds of unexpected problems, ensure the use of the process is more safe, naturally will bring better use effect. Of course, if the machine fails, do not panic, calm analysis of the cause of the failure, the corresponding solution. For more information, visit www.zkhntjbc.com!

截屏,微信识别二维码